AMJ45 K Class EA
Performance Characteristics
full shielded
360° shielding contact and strain relief by means of two (one, in the case of Cat.5e) separate, captive screw clamps for the exterior cable jacket and shielding
can be wired up from all directions, in 8x45° steps; enables reduction in stock diversity
either horizontal or vertical installation in the cable duct as a result of variable cable inlet
Type offers low installtion depth; problem-free installation in floor tanks as a result of cable inlet form the side within the subfloor mounting box
option of plug-in ground connection at all four corners; according to DIN 46342-1; 6,3 mm
can be combined with covers for a wide variety of switching programs
simple lead presorting guarantees leads will be laid without damage and good transmission performance
cover plate can be retrofitted with a flip-up loss-proof, transparent label field
dust cover flaps
detachable vertical fixing rail of the four-hole bearer ring (e. g. for subfloor installation)
Overbend protection: 6- (RJ11/12) and 8-pin connectors (RJ45) can be used interchangeably in the MJ outlets without additional installation kits
Mechanical Characteristics
Insertion force: ≤ 30 N
Life (mating cycles RJ45, RJ12, RJ11): ≥ 750
Material: housing: zinc diecast
Material: housing VAD Ap Compact:
Material: housing UMJ45:
Material: insulators: PA, PBT, ABS, PC
Material: PCB: FR4
Material: PCB finish:
Material: contact spring: CuSn, spring steel
Material: contact spring finish: min. 0,8 µm Au on 1,2 µm Ni
Material: contact IDC termination: CuZn
Material: IDC termination finish:
LSA Plus: Cu conductor diameter: solid 0,40 - 0,65 mm AWG 26/1 - AWG 22/1
LSA Plus: Wire diameter: 0.7 - 1.6 mm
Electrical Characteristics
Contact resistance: ≤ 20 mΩ
Insulation resistance: ≥ 500 MΩ
Voltage proof: contact-contact: ≥ 1000 V, DC
Voltage proof: contact-shield: ≥ 1500 V, DC
Current carrying capacity at 50°C: 1 A
PoE+ acc to IEEE 802.3at: Cat.6A
PoE according to IEEE802.3af: Cat.5e
Standards
Connectors: IEC 60603-7-5 / -7-3
Transmission Chracteristics
10 Gigabit Ethernet acc. to IEEE 802.3an: for Cat.6A
Cat.6A: PL acc. to ANSI/TIA/EIA-568-B.2-10
Class EA: ISO/IEC 11801:2002 FPDAM2:2009; ISO/IEC 11801:2002+A1:2008
Cat.6: ISO/IEC 11801:2002, EN 50173-1:2007
Class E: ISO/IEC 11801:2002, EN 50173-1:2007
Channel Class E: ISO/IEC 11801:2002, EN 50173-1:2007
Gigabit Ethernet acc. to IEEE 802.3: Adequate for Gigabit Ethernet
Cat.5e: ISO/IEC 11801:2002, EN 50173-1:2007
Cat.3:
Filter
–
Telegartner: AMJ45 Cat.6/Channel Class EA shielded
Telegartner: AMJ45 Cat.6/Channel Class EA shielded,
AMJ45 8/8 Up/0 Cat.6/Class EA without face plate cable duct mounting, 2xRJ45 (packed per 5)
Product number:
100022944
Price on request
Telegartner: AMJ45 Cat.6/Channel Class EA shielded
Telegartner: AMJ45 Cat.6/Channel Class EA shielded,
AMJ45 8/8 Up/50 Cat.6/Channel Class EA cable duct mounting, 2xRJ45 pearl white RAL 1013 (packed per 5)
Product number:
J00020A0394
Price on request
Telegartner: AMJ45 Cat.6/Class EA shielded
Telegartner: AMJ45 Cat.6/Class EA shielded,
AMJ45 8/8 Up/50 Cat.6/Channel EA, cable duct mounting, 2xRJ45, alpine white (packed per 5)
Product number:
100022942
Price on request